2RB-8T25 2 Electrodes SMD Gas Discharge Tube 10KA 2.0pF GDT For High Density PCB Assemblies
Description of 2RB-8T25 2 Electrodes SMD Gas Discharge Tube 10KA 2.0pF GDT
Using the technical requirements of the leading industry, we has designed a super thin gas discharge tube, which is mainly used in the product's volume requirements and space constraints.
Gas discharge tubes (GDT) use noble gasses enclosed in ceramic tubes to provide an alternate circuit path for voltage spikes. The ceramic envelope and with nickel connectors allow for high loads. 2RB-8T25 Gas Discharge Tubes (GDT) series has a surge rating of 10kA, 8/20μs. This GDT series is perfectly suited for broadband equipment applications. The GDT’s low off-state capacitance is compatible with high bandwidth applications and this capacitance loading value does not vary if the voltage across the GDT changes.
Features of 2RB-8T25 2 Electrodes SMD Gas Discharge Tube 10KA 2.0pF GDT
• Excellent response to fast rising transients
• Stable breakdown voltage
• GHz working frequency
• 8/20μs Impulse current capability: 10KA
• Non-Radioactive
• Ultra Low capacitance (<2.0pF)
• Lead-free compliant
• RoHS and REACH compliant
• Size: Ф8mm*2.5mm
• Storage and operational temperature: -40~+90°C
Applications of 2RB-8T25 2 Electrodes SMD Gas Discharge Tube 10KA 2.0pF GDT
• Telecom CPE
• Communication equipment
• Surge Protective Devices
• High density PCB assemblies
| Part Number | DC
Spark-over Voltage 1) 2) @100V/S | Impulse Spark-over Voltage | Insulation Resistance
3) | Capacitance @1MHz | Life Ratings |
| Impulse Discharge Current @8/20μS | AC
Discharge Current | Impulse Life @10/1000μS 100A |
| 100V/μS | 1KV/μS |
| Max | Max | Min | Max | Nominal
±5 times | Max 1 time | Nominal 5 times | Min |
| V | V | V | GΩ | pF | KA | KA | A | Times |
| 2R090SB-8T25 90±20% 500 600 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R150SB-8T25 150±20% 500 600 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R230SB-8T25 230±20% 600 700 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R300SB-8T25 300±20% 750 850 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R350SB-8T25 300±20% 800 900 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R470SB-8T25 300±20% 900 1000 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R600SB-8T25 300±20% 1100 1200 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| 2R800SB-8T25 350±20% 1300 1500 | 1 | 2.0 | 10 | 15 | 10 | 300 |
| Glow Voltage at 10mA......................................................................... | ~60V | | | | | |
| Arc Voltage at 0.5A.............................................................................. | ~10V | | | | | |
| Glow to Arc transition Current………………………………………....... | ~1A | | | | | |
| Weight…………………………………………………………………....... | ~0.42g | | | | | |
| Operation and storage temperature…………………………………….. | -40~+90°C | | | | | |
| Climatic category (IEC 60068-1)………………………………………... | 40/90/21 | | | | | |
Soldering Parameters - Reflow Soldering (Surface Mount Devices)
| Reflow Condition | Pb - Free assembly |
| Pre Heat | -Temperature Min (Ts(min)) | 150°C |
| -Temperature Max (Ts(max)) | 200°C |
| - Time (min to max) (ts) | 60 -180 Seconds |
| Average ramp up rate ( Liquids Temp TL) to peak | 3°C/second max |
| TS(max) to TL - Ramp-up Rate | 5°C/second max |
| Reflow | - Temperature (TL) (Liquids) | 217°C |
| - Time (min to max) (ts) | 60 -150 Seconds |
| Peak Temperature (TP) | 260 +0/-5°C |
| Time within 5°C of actual peak Temperature (tp) | 10 - 30 Seconds |
| Ramp-down Rate | 6°C/second max |
| Time 25°C to peak Temperature (TP) | 8 minutes Max |
| Do not exceed | 260°C |
Product Tags:
|
|
2RB-8T25 2 Electrodes SMD Gas Discharge Tube 10KA 2.0pF GDT For High Density PCB Assemblies Images
|
